Rubber Roofing Sealant

Single-component roofing sealant

Application:

Sealing of coverings made of bituminous felt, sheet metal, roofing tiles
Sealing of gaps around flashings, chimneys, eaves, wind braces, drains, skylights, roofing felt coverings
For dry and wet substrates
For indoor and outdoor use

Properties:

Permanently flexible
Excellent adhesion to bituminous felt, bitumen, concrete, steel, ceramics, stone, wood, glass
Resistant to weather conditions, UV radiation and ageing

Available packaging:

Composition	SBS rubber, dearomatized solvent, additives
Colour	clear, brown
Consistency	plastic paste
Density	1,0 g/cm³
Drying time	approx. 2 mm/day
Penetration (23°C)	min. 190 [0,1 mm]
Adhesion to concrete: - at a temperature of +23°C, at an elongation of 30 mm - at a temperature of -20°C, at an elongation of 15 mm	does not detach from the substrate does not detach from the substrate
Formation of shrinkage cracks after 30 days at a temperature of 23°C	no cracks and no detachment from the substrate
Drainage on an aluminium sheet at a temperature of 70°C, at a 90° angle, in 5h	not more than 5 mm
Thermal resistance after curing	from -20°C to +80°C
Application temperature	from +5°C to +40°C

The temperature of the substrate and air during the works should be from +5°C to +40°C. Works should not be carried out during precipitation and strong sunlight.