Sealing Tape 120/70

Particularly suitable for indoor use

Application:

Reinforcement of waterproof insula ons indoors, e.g. in bathrooms, shower rooms
Performing local sealing in under-le waterproofing
Reinforcement of flexible insula on at corners, edges, expansion joints, pipe penetra ons, etc.
Bonding of deformable and non-deformable surfaces at wall-to-wall, wall-to-floor joints
For use in combina on with single-component liquid foils and two-component sealing mortars

Properties:

Available packaging:

Composition	polyester non-woven with a central strip made of thermoplastic elastomer TPE on both sides
Total width	120 mm
Width of the coated part	70 mm
Total thickness	0,61 - 0,90 mm
Mass per unit area	≥ 490 g/m²
Mechanical properties in tension	≥ 3,8 MPa - maximum tensile stress ≥ 110% - relative elongation at maximum tensile stress
Watertightness at a pressure of 0,15 MPa for 24 h	no leaks
Fatigue resistance - in a system with a waterproofing coating, intended for use, i.a. in balconies and terraces	no cracks in the coating and tape near the test slit and no other damage reducing the tightness
Reference document(s)	ITB-KOT-2019/0876 wydanie 3 + aneks 1

Prepare the substrate as recommended in the technical data sheets of the products used for inserting tapes.
Sealing tape 120/70 is applied to the fresh sealing material, pressed down and covered with the same material. The same is done with internal and external corners and wall and floor cuffs. For expansion joints, the tape should be pressed into the joint and a cavity in a shape of should be formed, providing room for deformation. It is then also not advisable to cover the entire width of the tape with a sealing material, as this would impair its stretchability.
Before use, please read the application details in the product's Technical Data Sheet.