Stick for detail work

Name: Stick for detail work
Brand: NEXLER
SKU: W-PAM09-V1F1A-NX1S-1000

Self-adhesive underlayer bituminous felt for detail work

Application:

Designed for roof detail work, including vertical detail work
Underlayer in multi-layer roof coverings, terraces and balconies, for any type of substrate
For concrete, sheet metal and wooden substrates, with or without thermal insulation
Particularly recommended for EPS
Damp-proof insulation of underground parts of buildings (type A)

Properties:

Double SBS modification
Excellent self-adhesive properties
Easy and convenient for roof detail work
Ensures quick and easy installation at the vertical/horizontal junction of any roof element (chimneys, parapets, ventilation pipes, etc.)
Convenient to use on foundations
Self-adhesive and mechanical installation

Available packaging:

0,5 x 10 m

Type of reinforcement	glass veil
Coating on the top side	foil
Low temperature flexibility	≤ -20°C
Width	0,5 m
Thickness	(2,5 ± 0,2) mm
Resistance to external fire exposure* *applies to the examined layer systems	B_roof(t₁), B_roof(t₂)
Reaction to fire	class E
Watertightness: waterproof at a pressure	≥ 2 kPa (method A) ≥ 10 kPa (method A)
Maximum tensile force: - longitudinal extension - transversal extension	450 ± 150 N/50 mm (4 ± 2) % 300 ± 150 N/50 mm (4 ± 2) %
Reference document(s)	EN 13707:2004+A2:2009; EN 13969:2004; EN 13969:2004/A1:2006
Resistance to root penetration	NPD
Resistance to static loading	≥ 5 kg (method B)
Resistance to impact	≥ 600 mm (method A)
Resistance to tearing: - longitudinal - transversal	150 ± 100 N 100 ± 50 N
Resistance of the joint: - shear strength • longitudinal joint • transversal joint	300 ± 150 N/50 mm 450 ± 150 N/50 mm
Durability: - durability after artificial ageing, watertightness - durability against chemical	≥ 2 kPa (method A) acc. to annex A of the standard EN 13969
Resistance to run-off at increased temperatures	100°C
Peeling strength of bituminous felt from polystyrene boards: - at 23°C and 50% humidity - after 24 hours of water exposure at 20°C - after 24 hours exposure to 70°C	110 ± 7 kPa 100 ± 9 kPa 140 ± 11 kPa
Resistance to tearing off the bituminous felt from the surface of polystyrene boards: - force tearing the bituminous felt off the EPS boards	14,4 ± 1,5 N

Making an insulation using NEXLER Stick for detail work bituminous felt should be carried out according to the technical design, in accordance with the current building regulations and the detailed guidelines for the design and execution of insulation contained in NEXLER Insulation Systems and the Technical Data Sheet.
The bituminous felt should be installed in ambient temperatures of above +10°C, this requirement applies to the time of day and night.
Do not carry out insulation work during strong winds and precipitation.
In addition, the substrate should meet the following requirements:
- dry substrate (concrete in an air-dry condition, without any visible traces of moisture or darkening caused by moisture),
- clean substrate (the surface of the concrete is free of loose fractions, dust, oil stains, grease and other impurities),
- smooth substrate (local unevenness and cavities in the surface of concrete do not exceed ± 5 mm),
- even substrate (the gaps between the surface of the substrate and a 4 m long batten placed on the concrete substrate do not exceed 10 mm).
Before installing NEXLER Stick for detail work, it is recommended to prime the concrete substrate or the old bitumen coating with solvent-based asphalt agents, e.g. NEXLER Penetrator G7, or a water-based asphalt preparation, e.g. NEXLER BITFLEX Primer.
NEXLER Stick for detail work bituminous felt should be fixed using self-adhesive properties to EPS panels or other thermal insulation, to a primed concrete or sheet metal substrate. The bituminous felt can additionally be fixed mechanically. Application on concrete substrate should be carried out after the priming agent has completely dried (or cured). The final adhesion forces to the substrate in these cases are obtained after welding the next layer of bituminous felt onto the NEXLER Stick for detail work bituminous felt.
Surfaces to which the felt will be bonded must be dry. Once the roll has been unrolled, place it carefully in the space provided for it and cut off an appropriate section of the felt if necessary. Then remove the foil protecting the underside by pulling it simultaneously from both sides of the strip and at the same time pressing and levelling the surface of the felt after removing the foil.
NEXLER Stick for detail work bituminous felt can also be mechanically fixed together with or without thermal insulation to concrete, wood or sheet metal substrates. In that case the bituminous felt is fixed with mechanical connectors at the edge of the strip and then thermally activated at the overlaps. Maintain a bituminous felt overlap min. 8 cm wide along the length of the felt strip and an overlap min. 12 cm wide at the joint perpendicular to the length of the felt strip. The adhesive strength of the self-adhesive surface is optimal at ambient temperatures above 10°C. The best self-adhesive effect is achieved when welding the next layer of felt.
When carrying out vertical and horizontal detail work, the undersurface of the felt should be additionally heated to increase the adhesive strength. In areas that were folded vertically - cover with top-layer weldable bituminous felt in one working cycle. Details of substrate preparation and bituminous felt fixing are described in NEXLER Insulation Systems.
Before use, please read the application details in the product's Technical Data Sheet.

Get more details

NEXLER Flashing Felts: Fast, Effective Insulation for Roof Flashings

Insulating vertical roof elements—such as chimneys, parapets, and circular roof penetrations—are among the most time-consuming and challenging tasks for any roofer.

Go to the knowledge base