Gruntofol

Priming emulsion

Application:

Priming absorbent and porous substrates for using mineral-polymer products
Priming various types of substrates such as: concrete, cellular concrete, cement plaster, cement-lime plaster, plasterboard, wood, wood-based panels

Properties:

Available packaging:

Density in a 20°C temperature	1,0 ± 0,05 g/cm³
Drying time of a layer	approx. 1 h
The temperature of the substrate and air during the work	from +5°C to +30°C
Number of layers	1 - 2

Substrates intended for use of the product: concrete, cellular concrete, cement plaster, cement-lime plaster, plasterboard, wood, wood-based panels and other absorbent substrates. The substrate intended for product application should be bonded, dry, seasoned and load-bearing. The substrates should be cleaned mechanically, dust, any loose layers, sharp protruding edges and impurities that worsen adhesion should be removed. Any defects and irregularities in the mineral substrate should be filled in with a suitable mortar.
The product is applied to the substrate with a brush or a paint roller. Apply one coat to the substrate. For particularly absorbent substrates, it is recommended to carry out the priming operation twice, with the first coat being done with the product diluted with water in a 1:1 ratio. Once the primer has dried, the actual waterproofing layer is applied to the substrate thus prepared.
Before use, please read the application details in the product's Technical Data Sheet.

Documents for download