Pavement Guard
Impregnation for paving blocks and other concrete surfaces
Application:
- Impregnation and protection of paving blocks and concrete surfaces for vehicular and pedestrian traffic
- Protection of concrete facade cladding
Properties:
- Improves pavement durability by increasing abrasion resistance
- Improves surface appearance and enhances colour
- Increases resistance to weather conditions (rain, freezing)
- Makes it easier to keep surfaces clean, prevents the formation of permanent stains from oil and other contaminants
Available packaging:
- 5 l
Composition | synthetic resins, organic solvents, additives |
Drying time | 2 h at temp. of 20°C |
Number of layers | 1 - 2 |
Density | 0,88 - 0,92 g/cm³ |
Capillary absorption and permeability to water | < 0,1 kg/m² × h⁰,⁵ |
Adhesion strength by pull off test | ≥ 0,8 (0,5)a N/mm² |
Conventional viscosity, cup Φ 4 mm | 45 - 55 s |
Abrasion resistance on a Böhme disc compared to non-impregnated blocks | an increase of no less than 5% |
Roughness compared to non-impregnated blocks | a decrease of no more than 30% |
Resistance to peeling off from a substrate after frost resistance testing | ≥ 1,0 MPa |
Peel strength | ≥ 1,0 MPa |
Flash point | > 28°C |
Pedestrian traffic load | after 12 h |
Vehicle traffic load | after 72 h |
Application temperature | from +5°C to +25°C |
Available versions | semi-matte |
Reference document(s) | EN 1504-2:2004 |
The temperature of the substrate and air during the works should be from +5°C to +25°C. Works should not be carried out during precipitation and strong sunlight.
When using the Pavement Guard impregnate indoors, ventilate the rooms during and after the work.
0,17 - 0,20 l/m²
Get more details
How to effectively protect paving stones?
Paving stones lose their original appearance over time. Daily use, heavy foot and vehicle traffic, changing weather conditions and UV radiation make the surface more susceptible to dirt and damage.
Documents for download
Declaration of Performance
Safety Data Sheet
Technical Data Sheet
